Skip to content
ChoiceLumo

10 Best Ham Radio Lightning Protection For Antennas in 2026

This guide compares the top ham radio lightning protection for antennas to help you choose reliable surge arrestors for your base station, mobile rigs, and

As an Amazon Associate we earn from qualifying purchases. We may earn a commission when you buy through links on this page, at no additional cost to you. Read our affiliate disclosure.As an Amazon Associate we earn from qualifying purchases.Purchases through our links may earn us a commission, at no extra cost to you. Read our affiliate disclosure.
In this guide
  1. 01Top 3 picks
  2. 02Compare all 10
  3. 03In-depth reviews
  4. 04Buying guide
  5. 05Use and care
  6. 06Common questions
  7. 07Final verdict

Protecting your ham radio equipment from lightning strikes is essential for safety and longevity. A quality lightning arrestor diverts dangerous surges to ground before they damage your transceivers or accessories.

We compared ten top-rated coaxial lightning protection devices based on construction quality, insertion loss, frequency range, and grounding options to help you find the right fit for your setup.

Each pick includes key specs and pros to highlight performance trade-offs. Prices and availability change often so verify current details before purchasing to ensure you get the latest model.

Top 3 Picks for Best Ham Radio Lightning Protection for Antennas

Best Budget

XRDS-RF UHF Lightning Arrestor
XRDS-RF UHF Lightning Arrestor

4.6Editor score

Low VSWR under 1.2
Plated brass construction
Simple PL-259 connection

Check price

Editor's Choice

Diamond Antenna SP3000
Diamond Antenna SP3000

4.8Editor score

Wide DC to 3000MHz range
N-Type Female to Female connectors
High impulse wave discharge capacity

Check price

Best Premium

RAIGEN Lightning Arrestor N-Type
RAIGEN Lightning Arrestor N-Type

4.8Editor score

Replaceable 90V gas tube
0 to 6GHz wideband
Includes ground lug hardware

Check price

Top 10 Best Ham Radio Lightning Protection for Antennas in 2026 Compared

The following table presents a side-by-side overview of all ten selected coaxial surge arrestors with their connector types, frequency capabilities, and construction details.

ProductsSpecificationsEditor scorePrice
1XRDS-RF UHF Lightning Arrestor

Best Budget

XRDS-RF UHF Lightning Arrestor
PL-259 Female to Female
DC to 500MHz
Brass Nickel Plated Body
Insertion Loss under 0.4dB
4.6Editor score

Check price

2Diamond Antenna SP1000

Editor's Choice

Diamond Antenna SP1000
UHF SO-239 Coax
6000 Amps Discharge
Replaceable Arrester Element
Less than 0.3dB Loss
4.6Editor score

Check price

3Workman A28 Lightning ARRESTOR

Best Premium

Workman A28 Lightning ARRESTOR
PL-259 Male to Female
Side Ground Screw Included
Basic Surge Diversion
Low Cost Entry Model
4.5Editor score

Check price

4Proxicast ProGrade 230V

Proxicast ProGrade 230V
SO-239 to SO-239
230V Gas Discharge Tube
Bi-Directional Protection
DC Pass-Through
4.6Editor score

Check price

5UHF PL259 Coax Surge Protector

UHF PL259 Coax Surge Protector
Female to Female UHF
Aluminum Housing
No Fuse Replacements
Earth Lead Included
5.0Editor score

Check price

6Diamond Antenna SP3000

Diamond Antenna SP3000
N-Type Female to Female
DC to 3000MHz
1000V Impulse Discharge
200W Power Rating
4.8Editor score

Check price

7XRDS-RF Bulkhead Arrestor

XRDS-RF Bulkhead Arrestor
UHF Male to Female
Integrated Nut for Mounting
230V Gas Tube
Up to 50W Max
4.4Editor score

Check price

8Coaxial Lightning Arrester 2 Pack

Coaxial Lightning Arrester 2 Pack
UHF Female to Female
Brass Nickel Plated
Gas Discharge Tubes
Two Units Per Box
4.6Editor score

Check price

9RAIGEN Lightning Arrestor N-Type

RAIGEN Lightning Arrestor N-Type
N-Type Male to Female
Replaceable 90V Tube
0 to 6GHz Range
Includes Ground Lug
4.8Editor score

Check price

10Opek LP-350a Surge Protector

Opek LP-350a Surge Protector
PL-259 Compatible
0 to 600MHz Range
50 Ohm Impedance
Ground Terminal Screw
4.6Editor score

Check price

1. Diamond Antenna SP3000 – Best Overall Ham Radio Lightning Protection

Diamond Antenna SP3000 Lightning Arrester – 200W, DC-3000MHz, N-Type Female/Female, Surge Protector for Ham Radio Antennas4.8Editor scoreCheck price on Amazon
Diamond Antenna SP3000
DC to 3000MHz Range
N-Type Female Connectors
1000V Impulse Discharge
High Power Handling 200W

The Diamond Antenna SP3000 stands out as the top pick for serious ham radio operators who need broad frequency coverage and robust protection. It earns high marks for its wide DC to 3000MHz range which covers HF VHF UHF and beyond without signal degradation.

Pros

  • Extremely wide frequency coverage
  • Durable N-Type connectors
  • High discharge capacity
  • Low insertion loss
  • Reliable brand reputation

Cons

  • Higher price point
  • N-Type requires specific cable

We may earn a commission when you buy through this link, at no additional cost to you.

Its N-Type connectors ensure a secure weather-resistant connection ideal for base stations or fixed outdoor installs. The 200W power handling and 1000V impulse discharge capacity mean it can survive strong strikes while keeping your radio safe from surges.

The only trade-off is the cost and the need for N-Type coaxial cables which are less common than PL-259 but worth the upgrade for performance. If you run multiple bands or plan to upgrade your antenna system this arrester grows with you.

Buyers seeking a premium long-term solution should choose this model to protect expensive transceivers and towers. It delivers reliability and peace of mind during storm season for any enthusiast who values equipment safety above all else.

Wide Frequency Coverage for All Bands

The DC to 3000MHz range ensures you can use this arrestor across HF VHF UHF and microwave setups without needing multiple devices.

Robust N-Type Connection

N-Type connectors offer better sealing and lower loss compared to standard UHF connectors making them ideal for high-performance systems.

Check price on Amazon

We may earn a commission when you buy through this link, at no additional cost to you.

2. XRDS-RF UHF Lightning Arrestor – Best Budget Ham Radio Lightning Protection

XRDS-RF UHF Lightning Arrestor PL-259 Lightning Surge Protector UHF Female to Female Coaxial Connector for CB Ham Two-Way Radio Base Antennas4.6Editor scoreCheck price on Amazon
XRDS-RF UHF Lightning Arrestor
PL-259 Female Connectors
DC to 500MHz Range
Insertion Loss under 0.4dB
Brass Nickel Plated Body

The XRDS-RF UHF Lightning Arrestor delivers solid protection at an unbeatable price making it perfect for budget-conscious hams or backup setups. It features standard PL-259 connectors that work with most amateur coax cables right out of the box.

Pros

  • Very affordable price
  • Easy to install PL-259
  • Low loss design
  • Corrosion resistant plating
  • Good for HF and VHF

Cons

  • Lower frequency limit
  • Requires separate ground cable

We may earn a commission when you buy through this link, at no additional cost to you.

Performance is strong for its class with insertion loss under 0.4dB and a VSWR below 1.2 ensuring minimal signal impact on your HF and VHF transmissions. The brass body with nickel plating resists rust in outdoor environments.

Keep in mind this model tops out at 500MHz which excludes UHF and microwave bands so it is best suited for HF VHF or CB use. You will also need to supply your own grounding wire for proper surge diversion.

Choose this if you want reliable basic protection without spending much or if you are protecting a temporary portable station. It offers excellent value and simplicity for operators who prioritize affordability.

Simple PL-259 Compatibility

Standard UHF connectors make this arrestor easy to integrate into existing cable runs without needing adapters or special tools.

Cost-Effective Surge Diversion

Despite the low cost the internal gas discharge technology effectively redirects dangerous voltage spikes away from sensitive radio gear.

Check price on Amazon

We may earn a commission when you buy through this link, at no additional cost to you.

3. RAIGEN Lightning Arrestor N-Type – Best Premium Ham Radio Lightning Protection

RAIGEN Lightning Arrestor for N-Type Male to N-Type Female Outdoor Antenna Surge Protector 50 Ohm RF Coaxial Protects LoRaWAN, LoRa, WiFi, IoT, Cell Booster, 3/4G LTE, WiFi 2.4/5GHz, CB, Ham, Solar4.8Editor scoreCheck price on Amazon
RAIGEN Lightning Arrestor N-Type
N-Type Male to Female
0 to 6GHz Range
Replaceable 90V Gas Tube
Ground Lug Included

RAIGEN offers a premium option with a replaceable gas discharge tube that ensures long-term reliability even after multiple strikes. The 0 to 6GHz bandwidth covers everything from shortwave to 5G and Wi-Fi signals without compromising performance.

Pros

  • Replaceable gas tube
  • Extremely wide bandwidth
  • Very low insertion loss
  • Includes ground lug
  • Weatherproof build

Cons

  • Higher cost
  • Overkill for simple HF

We may earn a commission when you buy through this link, at no additional cost to you.

Insertion loss is less than 0.1dB which is among the lowest in the market so your signal stays strong. The unit includes a ground lug for easy bonding to your station ground system and the housing is built for permanent outdoor use.

This level of performance comes at a higher price and may be excessive for a basic HF setup but it pays off if you run many bands or protect expensive infrastructure. It is ideal for IoT cell boosters or multi-purpose antennas.

Install this if you want the best surge protection and the ability to replace the tube later. It provides peace of mind for complex or mission-critical setups where failure is not an option.

Replaceable Gas Discharge Tube

The standard 90V tube can be swapped out after a major strike restoring full protection without replacing the entire arrestor unit.

Multi-Band Wideband Capability

From 0 to 6GHz the arrestor handles diverse signals simultaneously making it suitable for hybrid systems that mix ham and data comms.

Check price on Amazon

We may earn a commission when you buy through this link, at no additional cost to you.

4. Diamond Antenna SP1000 – Best Mobile Station Ham Radio Lightning Protection

Diamond Antenna SP1000 SP-Series Lightning Arrester High Voltage Protection Device for Mobile and Base Station Antennas Prevents Equipment Damage from Lightning Strikes4.6Editor scoreCheck price on Amazon
Diamond Antenna SP1000
UHF SO-239 Connectors
6000 Amps Discharge
Insertion Loss under 0.3dB
Replaceable Arrester Element

The Diamond SP1000 is designed for mobile and base station use with a 6000A impulse discharge capability and a replaceable arrester element. It keeps insertion loss below 0.3dB which is excellent for maintaining clear signal strength during transmission.

Pros

  • High discharge capacity
  • Replaceable element
  • Low insertion loss
  • Weather resistant
  • Fits mobile and base

Cons

  • Price higher than basics
  • Requires grounding kit

We may earn a commission when you buy through this link, at no additional cost to you.

Its UHF SO-239 connectors suit common mobile setups and many base station coax runs. The durable weather-resistant housing ensures it performs outdoors even after months of exposure to sun rain and salt air.

The element replacement feature adds long-term value but requires spare parts on hand which some may find inconvenient. You must also route a ground cable properly to realize its full protection potential during storms.

Consider this if you need a proven reliable unit for daily operations and want the option to refurbish it. It balances performance and practicality well for hams who value brand trust.

High Discharge Capacity

The 6000A impulse rating means this arrestor can handle large surges without failing protecting your equipment from severe lightning events.

Low Insertion Loss Design

Insertion loss under 0.3dB ensures your RF signal suffers minimal attenuation keeping your transmissions clear and efficient.

Check price on Amazon

We may earn a commission when you buy through this link, at no additional cost to you.

5. Proxicast ProGrade 230V – Best Bi-Directional Protection

Proxicast ProGrade 230V Coaxial Lightning Arrester - UHF SO-239 / SO-2394.6Editor scoreCheck price on Amazon
Proxicast ProGrade 230V
SO-239 to SO-239
230V Gas Tube
Bi-Directional Protection
DC Pass-Through

The Proxicast ProGrade arrestor offers bi-directional protection which shields both your radio and antenna from surges regardless of direction. It features standard SO-239 connectors that fit most 50-ohm coax and supports DC pass-through for active antennas.

Pros

  • Bi-directional surge handling
  • Standard SO-239 connectors
  • Low RF insertion loss
  • DC pass-through support
  • Weather rated

Cons

  • Moderate price
  • Ground cable needed

We may earn a commission when you buy through this link, at no additional cost to you.

Its 230V gas discharge tube shunts transients to ground efficiently while maintaining low insertion loss. This makes it a solid choice for users who need straightforward inline protection without worrying about polarity or signal path direction.

Installation is simple but you must connect a ground wire to the unit to complete the protection circuit. Without proper grounding the arrestor cannot divert energy safely so ensure your station grounding meets best practices.

Buy this if you want reliable bi-directional surge handling for VHF UHF HF and CB. It provides good performance for general purpose installs and is easy to integrate into existing systems.

Bi-Directional Surge Handling

This arrestor protects against surges from the antenna or the power side offering flexible protection for complex antenna systems.

Standard Coax Compatibility

SO-239 connectors match common coaxial cable types used in ham radio and CB making integration straightforward without adapters.

Check price on Amazon

We may earn a commission when you buy through this link, at no additional cost to you.

6. UHF PL259 Coax Surge Protector – Best Simple Plug and Play

Lightning Arrester UHF PL259 Female to Female Coaxial Surge Protector for VHF,Two-Way Radio Ham,CB 1pc5.0Editor scoreCheck price on Amazon
UHF PL259 Coax Surge Protector
Female to Female UHF
Aluminum Housing
Earth Lead Included
No Fuse Replacements

This arrestor simplifies installation by including an earth lead so you can connect it immediately to your grounding system. The female to female UHF design plugs directly into your coax line without extra adapters or complex wiring steps.

Pros

  • Includes earth lead
  • Plug and play
  • Aluminum housing
  • No fuses to replace
  • High user rating

Cons

  • Basic specs
  • Limited frequency range

We may earn a commission when you buy through this link, at no additional cost to you.

It uses an aluminum housing for heat dissipation and corrosion resistance while its internal components require no fuse replacements. Users love the plug and play convenience and the consistent performance across HF VHF and CB bands.

While the frequency range and specs are basic compared to premium models it covers the essential needs of most hams. It may not suit wideband or high-power setups but delivers value for everyday protection.

Choose this if you want an easy affordable solution that works right away. It is perfect for new operators or those who prioritize simplicity over high-end specs.

Included Earth Lead

Having the grounding wire included in the package saves time and ensures you have the necessary parts for a safe install.

No Fuse Maintenance

The internal design avoids fuses that blow after surges reducing ongoing maintenance and keeping protection active without replacements.

Check price on Amazon

We may earn a commission when you buy through this link, at no additional cost to you.

7. XRDS-RF Bulkhead Arrestor – Best Bulkhead Mount

XRDS-RF UHF Lightning Arrestor PL-259 Lightning Surge Protector PL259 Plug (UHF Male) to SO239 Socket (UHF Female) Bulkhead Arrestor for CB Ham Two-Way Radio Base Antennas4.4Editor scoreCheck price on Amazon
XRDS-RF Bulkhead Arrestor
UHF Male to Female
Integrated Mounting Nut
230V Gas Tube
Up to 50W Max

The XRDS-RF bulkhead arrestor stands out with an integrated nut and thread depth that lets you mount it through an enclosure wall or panel. The male to female transition connects coax on one side to the radio or antenna on the other.

Pros

  • Bulkhead mounting option
  • Male to female transition
  • Integrated nut
  • Low VSWR
  • Plated brass construction

Cons

  • Lower power limit
  • Specific connector transition

We may earn a commission when you buy through this link, at no additional cost to you.

It maintains low VSWR and insertion loss across DC to 500MHz so signal quality stays high. The brass nickel plated body is sturdy and resists corrosion for outdoor use near antennas or base stations.

Power handling is limited to 50W which makes it unsuitable for high-power transmitters. If your system runs under that limit it works well as a weatherproof feed-through point for grounding and surge protection.

Use this when you need to feed coax through a metal box or wall and want to minimize extra connectors. It combines bulkhead functionality with reliable surge protection in one compact unit.

Integrated Mounting Hardware

The built-in nut allows you to secure the arrestor flush against an enclosure reducing cable strain and improving weather resistance.

Low VSWR Signal Integrity

VSWR under 1.2 ensures minimal reflected power which protects your transmitter and keeps SWR readings accurate.

Check price on Amazon

We may earn a commission when you buy through this link, at no additional cost to you.

8. Coaxial Lightning Arrester 2 Pack – Best Multi-Antenna Setup

Coaxial Lightning Arrester 2 Pack, UHF Female-to-Female, SO-2394.6Editor scoreCheck price on Amazon
Coaxial Lightning Arrester 2 Pack
UHF Female to Female
Brass Nickel Plated
Gas Discharge Tubes
Two Units Per Box

Buying two arrestors together lets you protect multiple antennas or keep a spare on hand for future setups. Each unit uses UHF female to female connectors and brass nickel plated housing for durability in all weather conditions.

Pros

  • Two units in box
  • Low insertion loss
  • Corrosion resistant
  • Wide bandwidth
  • High interference immunity

Cons

  • Basic specs per unit
  • Grounding not included

We may earn a commission when you buy through this link, at no additional cost to you.

The gas discharge tubes divert surges efficiently and the design offers low insertion loss plus high interference immunity. This makes the pair a practical choice for operators running multiple antennas or who need backup units.

While the individual specs are straightforward they cover most CB HF VHF needs without complexity. You will need to provide your own grounding wires for each unit to ensure proper surge diversion.

Get this pack if you have more than one antenna or want redundancy. The value of two units at one price outweighs buying single units separately.

Value of Two Units

Having two arrestors allows you to protect both transmit and receive antennas or keep a spare ready for quick replacement if needed.

High Interference Immunity

The coaxial structure and shielding provide high immunity to external interference keeping your signals clean and strong.

Check price on Amazon

We may earn a commission when you buy through this link, at no additional cost to you.

9. Opek LP-350a – Best for Static Discharge

Opek LP-350a Lightning static Surge Protector Cb ham Radio Antenna 50 Ohm4.6Editor scoreCheck price on Amazon
Opek LP-350a
PL-259 Compatible
0 to 600MHz Range
50 Ohm Impedance
Ground Terminal Screw

The Opek LP-350a is designed to handle static discharge as well as surges making it a solid option for windy regions. It supports 0 to 600MHz and up to 350W so it works well with most HF VHF stations.

Pros

  • Handles static discharge
  • 50 Ohm impedance
  • Simple ground terminal
  • Up to 350W power
  • Affordable option

Cons

  • Older design
  • Limited frequency range

We may earn a commission when you buy through this link, at no additional cost to you.

Its 50 Ohm impedance matches common coax and the ground terminal screw ensures you can bond it reliably to your earth system. The simple construction means few failure points over time.

While it lacks some modern features the unit performs its core task of diverting excess energy. It may feel dated compared to newer models but it still offers dependable protection for base stations.

Choose this if you need a cost-effective static and surge protector that handles moderate power. It is a reliable choice for standard amateur setups.

Static Discharge Handling

Built-in static protection prevents charge buildup from damaging your radio during windy weather or dry seasons.

Simple Ground Terminal

The terminal screw allows you to attach a ground wire quickly and securely to divert surges effectively.

Check price on Amazon

We may earn a commission when you buy through this link, at no additional cost to you.

10. Lightning ARRESTOR Workman A28 – Best Entry Level

Lightning ARRESTOR for CB or Ham Base Antennas - Workman A284.5Editor scoreCheck price on Amazon
Lightning ARRESTOR Workman A28
PL-259 Male to Female
Side Ground Screw
Coaxial Surge Protector
Entry Level Price

The Workman A28 is the most affordable option on this list and still provides basic surge protection for CB and ham base stations. It uses PL-259 connectors and a side ground screw for quick installation in any coax line.

Pros

  • Very low price
  • Side ground screw
  • Basic surge protection
  • Easy to find
  • Simple installation

Cons

  • Basic build quality
  • Few advanced features

We may earn a commission when you buy through this link, at no additional cost to you.

Its design is simple without advanced specs but it works to divert surges away from your radio. The low cost makes it a good choice for temporary setups or when funds are limited.

Be aware it lacks the bandwidth and power handling of higher-end models so avoid using it on high-power UHF setups. It suits entry-level users or backup roles where heavy duty specs are not required.

Buy this if you need a quick cheap solution for surge protection. It delivers essential safety features without unnecessary cost for basic operations.

Entry Level Affordability

This arrester provides core surge protection at a price accessible to new operators or those on a tight budget.

Side Ground Screw Access

A side ground screw simplifies connection to a ground wire so you can install the unit without special tools.

Check price on Amazon

We may earn a commission when you buy through this link, at no additional cost to you.

Buying Guide – How to Choose the Best Ham Radio Lightning Protection for Antennas

Choosing the right lightning protection depends on your frequencies power and connector types. Review these factors to match an arrestor to your setup.

Connector Type

Verify the arrestor connectors match your coax ends. Common types include PL-259 UHF SO-239 N-Type and others. Mismatches force adapters that can add loss or create weak points.

Use arrestors with matching connectors to minimize adapters and preserve signal integrity.

Frequency Range

Select an arrestor covering all bands you use. Some models max at 500MHz while others reach 3GHz or 6GHz. Wideband models suit multiple bands better.

Choose a range that matches your highest frequency to avoid gaps in coverage.

Insertion Loss

Insertion loss measures signal reduction caused by the arrestor. Lower values like under 0.4dB keep your signal strong. High loss can degrade SWR and transmit power.

Prioritize models with low insertion loss to maintain clear transmission quality.

Grounding Method

Proper grounding is critical for arrestors to divert surges. Look for built-in ground lugs or screw terminals. Without a low-impedance path to earth protection fails.

Ensure your ground system connects directly to the arrestor for maximum safety.

Power Handling

Check the wattage rating of the arrestor. High power transmitters need robust units that can handle heat and voltage spikes. Low ratings risk internal damage.

Pick an arrestor rated above your transmitter power to ensure reliability.

Construction Material

Outdoor arrestors face rain sun and corrosion. Brass nickel plated or aluminum housings resist rust. Plastic bodies may degrade over time.

Choose weather-rated metal bodies for long-term outdoor installation.

Replaceability

Some arrestors have replaceable gas tubes or elements. This extends service life after a strike. Non-replaceable units may need full replacement.

Consider models with replaceable parts to save money in the long run.

Mounting Options

Bulkhead arrestors let you mount through panels or enclosures. Others are inline only. Think about where you need the unit installed in your station.

Select mounting styles that fit your station layout and coax routing.

How to Use and Care for Your Ham Radio Lightning Protection for Antennas

Install the arrestor as close as possible to the radio end of the coax feedline. Place it outside or at the entrance of your building to divert surges before they enter the shelter. Use short ground cables to keep impedance low.

Tighten connectors firmly but do not over-torque. Check the unit monthly for corrosion or loose ground wires. Clean threads with a soft brush if needed to maintain electrical contact.

After a severe storm inspect the arrestor for signs of damage. If it includes a replaceable element swap it out to restore protection. Always test grounding continuity before returning to operation.

Frequently Asked Questions

Do lightning arrestors guarantee protection from every strike?

Arrestors reduce risk significantly but no device guarantees protection from direct hits. They divert most surges safely to ground. For maximum safety disconnect antennas during storms if possible.

What ground cable length should I use with an arrestor?

Keep the ground wire as short and straight as possible ideally under three feet. Longer cables increase impedance and reduce effectiveness. Bond to a dedicated ground rod or system ground.

Can I use a PL-259 arrestor with N-Type coax?

Not directly. You need adapters which add loss and potential failure points. Ideally use arrestors that match your connectors exactly to maintain performance and reliability.

How often should I replace my lightning arrestor?

Inspect annually or after major storms. Replace if you see physical damage or corrosion. Units with replaceable elements only need those swapped when tested or damaged.

Does an arrestor affect signal quality when not struck?

Good arrestors have low insertion loss under 0.5dB so signal impact is minimal. High loss models may reduce SWR and power slightly. Choose low-loss units for best results.

Do I need an arrestor for every antenna?

Ideally yes especially for outdoor permanent antennas. Each antenna path can carry surges into your station. Protecting all lines reduces overall risk significantly.

Final Thoughts on Choosing the Best Ham Radio Lightning Protection for Antennas

The Diamond Antenna SP3000 XRDS-RF UHF Lightning Arrestor and RAIGEN N-Type arrestor lead this roundup with performance and versatility. They cover different budgets and connector needs while delivering strong protection.

Focus on matching connectors frequency range and grounding to your station. A well-installed arrestor safeguards your investment and keeps you on air when storms roll in.

Prices and availability shift so confirm the latest details on each model before buying. Your safety and gear depend on choosing the right surge protection today.